Protector PVC Perchloric Acid Laboratory Hoods

Protector PVC Perchloric Acid Laboratory Hoods feature washdown systems, integral work surfaces and drainage troughs so that they may be thoroughly rinsed after each use to prevent the accumulation of potentially reactive perchloric salts. Their liners of Type 1 unplasticized polyvinyl chloride are designed to withstand reaction from perchloric acid.

Use Our Product Selection Tools

Scout™ Lab Equipment Selector

Let Scout lead you to the right laboratory hood or sample prep equipment for your application.

Featuring washdown systems, integral work surfaces and drainage troughs, these benchtop PVC-lined hoods are designed specifically for procedures involving perchloric acid.

Features (All Models)

By-pass airflow design and by-pass block
Powder-coated stainless steel Eco-Foil air foil with Clean-Sweep airflow openings
Glacier white, powder-coated steel exterior
Cord-Keeper slots on left and right side of air foil
Heat-welded unplasticized PVC liner (30.0" interior depth) with integral work surface, drainage trough and pre-set baffle(s). PVC withstands maximum continuous operating temperature of 140° F (60° C) and has a flame spread less than 25 per ASTM E84
Black enamel-coated hardboard supporting surface
Powder-coated aluminum sash handle with Clean-Sweep openings and Clean-Sweep slots on the powder-coated stainless steel sash tracks
3/16" thick tempered safety glass vertical-rising sash with cable and pulley, suitable for perchloric acid use
Removable front and side panels and front access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
Built-in washdown system with internal piping and spray nozzles with maximum flow rate from 0.5-1.0 GPM
Washdown fitting located on top of hood to facilitate connection to external wash rings (wash rings not included)
12.75" OD PVC exhaust connection(s)

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing and plastic serrated hose connector for gas and lower left side with copper tubing and gray PVC swivel gooseneck faucet for cold water. Components for converting the lower right fixture to air or vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side

Required Accessories (Not Included)

Dedicated remote PVC blower
Wash rings and other ductwork
Base cabinet or stand

Optional Accessories

Service Fixture Kits
Electrical Duplex Kits
Guardian Airflow Monitor Kits
Sash Stop Kits
Ceiling Enclosure and Rear Finish Panel Kits

Compliance

SEFA 1
NFPA 45
ASTM E84-09C
ASHRAE 110
ANSI Z9.5
SEFA 8
CFR 29, Part 1910
UL 61010-1
CAN/CSA C22.2 No. 61010.1
UL 1805

Our Product Representatives Are Here To Help

Chemical Fume Hood Installation

This video shows how to install a Labconco Protector Fume Hood. This video features a Protector XStream Fume Hood, and most installations are similar.

Fume Hoods Overview 2013

Literature & Resources

Brochures
- Protector Special Application Laboratory Fume Hoods Brochure
  This brochure contains ordering information, specifications and dimensional data for Protector Stainless Steel Radioisotope, Stainless Steel Perchloric Acid and PVC Perchloric & Acid Digestion Laboratory Hoods.
  View Files
User's Manuals
- Protector PVC Perchloric Acid and Acid Digestion Laboratory Fume Hoods Manual
  For Perchloric Acid Models 14041, 14051, 14061, 14081 Series
  
  Acid Digestion Models 14141, 14151, 14161, 14181 Series
  View Files
- Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (115 volt)
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 115 volt, 60 Hz operation. Part number is 9826500, Rev. -.
  View Files
- Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (230 volt)
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 230 volt, 50/60 Hz operation. Part number is 9834200, Rev. -.
  View Files
- Wiring Diagram for 8' Protector Series Laboratory Hoods
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 115 volt, 60 Hz operation. Part number is 9827300, Rev. -.
  View Files
- Wiring Diagram for 8' Protector Series Laboratory Hoods
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 230 volt, 50/60 Hz operation. Part number is 9834300, Rev. -.
  View Files
En Español
- Campanas extractoras para laboratorios Protector y Basic
  Proporciona beneficios, especificaciones y fotos. La protección del entorno de su laboratorio es el fundamento del desarrollo de nuestros productos y cada campana extractora Labconco está diseñada pensando en la seguridad. Cuando los ingenieros de Labconco diseñaron la más reciente generación de campanas extractoras para laboratorios Protector XStream, Premier y XL, en adición a la seguridad, consideraron el ahorro en el consumo de energía.
  View Files
White Papers
- Perchloric Acid Fume Hood Mechanical Systems
  This paper describes fume system design components, safe practices and decontamination procedures related to perchloric acid use.
  View Files
3-Part Specs
- Protector PVC Perchloric Acid and Acid Digestion Laboratory Hoods Specifications
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood
  For validation of predetermined Protector Series Laboratory Fume Hood specifications. Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Series Laboratory Fume Hoods.
  View Files
Declarations of Conformity
- CE Declaration of Conformity - Protector PVC Fume Hoods
  For 14041 Series, 14051 Series, 14061 Series, and 14081 Series Protector PVC Perchloric Acid Hoods and 14141 Series, 14151 Series, 14161 Series, and 14181 Series Protector PVC Acid Digestion Hoods
  View Files

Search

Protector PVC Perchloric Acid Laboratory Hoods

Use Our Product Selection Tools

Scout™ Lab Equipment Selector

Features (All Models)

Fixtured Models May Feature

Required Accessories (Not Included)

Optional Accessories

Compliance

Our Product Representatives Are Here To Help

Product Service

Service Advisor

Chemical Fume Hood Installation

Fume Hoods Overview 2013

Literature & Resources

Brochures

Protector Special Application Laboratory Fume Hoods Brochure

User's Manuals

Protector PVC Perchloric Acid and Acid Digestion Laboratory Fume Hoods Manual

Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (115 volt)

Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (230 volt)

Wiring Diagram for 8' Protector Series Laboratory Hoods

Wiring Diagram for 8' Protector Series Laboratory Hoods

En Español

Campanas extractoras para laboratorios Protector y Basic

White Papers

Perchloric Acid Fume Hood Mechanical Systems

3-Part Specs

Protector PVC Perchloric Acid and Acid Digestion Laboratory Hoods Specifications

Installation Qualification / Operation Qualification

Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood

Declarations of Conformity

CE Declaration of Conformity - Protector PVC Fume Hoods

Related Products